Knowing how to calibrate the Phantom 4 IMU is important.  If your Phantom 4 is flying erratically or is not flying correctly to your touch, then your best option is to fly the drone in and calibrate the IMU. When the IMU is back in the green and within the ideal range, then it is…

 

This post shows you how to calibrate the compass on the Phantom 4 drone. The compass calibration is the same for both Phantom 4 and Phantom 4 Pro. You should calibrate the Phantom 4 compass if the DJI GO 4 app or the status indicator prompts you to calibrate. This could be when you have…

 

Knowing how to update the DJI Phantom 4 firmware to the latest version is important. These firmware updates contain fixes to solve software bugs, add new features to the quadcopter, gimbal, camera and remote controller. This article has all the instructions, best practices and tips on how to successfully update the firmware on your Phantoms 4….

 

These top drone aerial filming tips, flying techniques and maneuvers are easy to follow and with some practice your aerial filming will improve dramatically. Great aerial filming is more than knowing camera settings such as white balance, shutter speeds, aperture and ISO settings. To get great aerial video, you need to plan your trip, check…

 

The Phantom 3 tilt horizon problem is a real nuisance in your aerial film.  In may cases, it can be fixed with some simple steps. While these tips for fixing horizon tilt are for the Phantom 3, many other drones have similar technology so you can use this information as a guide to fixed horizon…

 

A remote control lost signal while flying your Phantom 3 can be quite scary.  If you are not an experienced pilot it could lead to a crash ruining your quadcopter and perhaps causing some 3rd party damage. If you are having Phantom 3 RC signal loss at the moment, then this post along with videos…

 

Keeping your DJI Phantom 3 firmware updated is extremely important. Firmware updates contain fixes for bugs, add new features and make improvements.  With the Phantom 3, you update both the quadcopter and remote controller with the same firmware file. Since the release of the new Phantom 3 Professional and Advanced models in April, there are…

 

The Phantom 3 IMU calibration procedure is simple and takes between 5 and 10 minutes. The IMU calibration will fix many of the Phantom 3 issues including erratic flying, no signal and compass errors. The IMU calibration will fix excessive warm up times, off horizon viewing issues and the usual yellow and red flashing lights…

 

The Phantom 3 and Inspire 1 now have DJI waypoint navigation by a firmware and Go App update and not through the Ground Station app. Both drones are pretty impressive. However, when these drones were first released they didn’t come with waypoint navigation which was certainly a big disappointment. Not having waypoints took most people…

 

Increasing the FPV range on the Phantom 2 Vision+ really adds to the enjoyment of flying.   You can fly higher and further giving you opportunities to photograph and film unique aerial footage.  This post with videos give you 2 terrific solutions to extending the FPV range on your Phantom 2 Vision+.

 

When your Phantom loses GPS signal and enters failsafe mode, their are always some anxious moments as you are unsure whether your quadcopter will return to it’s home point. If the Phantom is out of sight, the anxiety is even greater until you see your Phantom coming back to you.  It’s not a good feeling…

 

Problems with the GPS signal or loss of GPS on your Phantom 2 Vision is a worry and can lead to fly away issues or in the worse case, your drone crashing. This article and drone diy video below will show you how to improve the GPS signal on your Phantom 2 Vision+. You can look…