These DJI drone tips will assist greatly whether it is updating the firmware, fixing issues, improving the flying capabilities or looking for better components
The Phantom 3 IMU calibration procedure is simple and takes between 5 and 10 minutes. The IMU calibration will fix most of the Phantom 3 issues including erratic flying, no signal and compass errors. The IMU calibration will fix excessive warm up times, off horizon viewing issues and the usual yellow and red flashing lights…
Increasing the FPV range on the Phantom 2 Vision+ really adds to the enjoyment of flying. You can fly higher and further giving you opportunities to photograph and film unique aerial footage. This post with videos give you 2 terrific solutions to extending the FPV range on your Phantom 2 Vision+.
When your Phantom loses GPS signal and enters failsafe mode, their are always some anxious moments as you are unsure whether your quadcopter will return to its home point. If the Phantom is out of sight, the anxiety is even greater until you see your Phantom coming back to you. It’s not a good feeling…
Problems with the GPS signal or loss of GPS on your Phantom 2 Vision is a worry and can lead to fly away issues or in the worse case, your drone crashing. This article and drone diy video below will show you how to improve the GPS signal on your Phantom 2 Vision+. You can look…
A reset or re-calibration of your Phantom’s IMU Compass will need to be completed if you are still receiving yellow and red flashing lights after using the normal compass calibration process. The problem occurs because the drone’s compass has come close to a strong magnetic field. This problem only happens in GPS mode and not in…
Calibrating your Phantom Compass is one of the most important steps to prevent Fly-Away issues. This article with videos explain the issue of fly-away along with how to prevent this from happening in the first place. The first video also discusses what to do when fly-away occurs. The Phantom has very fluid movement. You move…